API Ring Joint Gaskets are machined from variety types forged solid metal such as Soft Rron,ANSI304,ANSI316,Low carbon and alloy metals(including alloy825,alloy625,Duplex,Monel etc). they are designed for high pressure and temperature applications by selecting the suitable shape and material. Ring joint gaskets assemblies seal by an initial line contact or an edging action as the compressive forces are applied. The hardness of the ring should always be 20-30HB less than the flanges hardness to prevent flange deformation. Dimensions for standard ring joint gaskets and grooves are covered in ASME B16.20 and API 6A, API 17D and ASME B16.5/B16.20.
Ring joint gasket main including the following kinds:
BKG102A R type Oval Ring Joint Gasket
Ring joint gasket with oval cross section is initially developed for high temperature and pressure applications.It is still used in the old type round bottom groove today.
BKG102B R type Octagonal Ring Joint Gasket
Ring joint gasket with Octagonal cross section is prefered by morden grooved flanges and has a higher sealing efficiency than oval types.
BKG102C RX Ring Joint Gasket
RX is used at pressures up to 15,000 psi (103 MPa). it is adhered to API 6A and interchangeable with standard Octagonal rings, it can take advantage of container fluid pressure well to effect a seal
BKG102D BX Ring Joint Gasket
All BX gaskets incorporate a pressure balance hole to ensure equalization of pressure which may be trapped in the grooves,it is only used in API 6BX flanges.
BX is used at pressures up to 15,000 psi .
Ring joint gasket Specification:
-
1)To API 6A& ASME B16.20 standard.
-
2)R Series, RX,BX,IX,AX types are available
API Ring Joint Gaskets are machined from variety types forged solid metal such as Soft Rron,ANSI304,ANSI316,Low carbon and alloy metals(including alloy825,alloy625,Duplex,Monel etc). they are designed for high pressure and temperature applications by selecting the suitable shape and material. Ring joint gaskets assemblies seal by an initial line contact or an edging action as the compressive forces are applied. The hardness of the ring should always be 20-30HB less than the flanges hardness to prevent flange deformation. Dimensions for standard ring joint gaskets and grooves are covered in ASME B16.20 and API 6A, API 17D and ASME B16.5/B16.20.
Ring joint gasket main including the following kinds:
BKG102A R type Oval Ring Joint Gasket
Ring joint gasket with oval cross section is initially developed for high temperature and pressure applications.It is still used in the old type round bottom groove today.
BKG102B R type Octagonal Ring Joint Gasket
Ring joint gasket with Octagonal cross section is prefered by morden grooved flanges and has a higher sealing efficiency than oval types.
BKG102C RX Ring Joint Gasket
RX is used at pressures up to 15,000 psi (103 MPa). it is adhered to API 6A and interchangeable with standard Octagonal rings, it can take advantage of container fluid pressure well to effect a seal
BKG102D BX Ring Joint Gasket
All BX gaskets incorporate a pressure balance hole to ensure equalization of pressure which may be trapped in the grooves,it is only used in API 6BX flanges.
BX is used at pressures up to 15,000 psi .
Ring joint gasket Specification:
-
1)To API 6A& ASME B16.20 standard.
-
2)R Series, RX,BX,IX,AX types are available
Ningbo Bandak Industrial Co.,Ltd (previous name: Cixi Bandak Sealing and Packing Co,. Ltd) founded in 2002,as a leading manufacturer and distributor of sealing material&Insulation and Conveyor belt repair material products,our factory owns 4 senior engineers and over 70 well-trained workers.All our production are applied by ISO 9001-2000 standard.
China [CN] 
Click enlarge Image