double facer belt
double facer belt was developed to high speed running and rapid dying of the corrugated board. The structure and the quality of the belt facilitates steam evaporation from the paperboard. The belt is 3-layer belt. The structure of two surface layers are not the same as the middle layer. This structure is developed to produce flat boards on high-speed corrugating machines. The surface of the belt is twill weave to reduce the noise when high speed running on the machine,increase the friction coefficient.
Products Features:
double backer belt
Straight cut edge
Level surface, clean mark
Fasteners Cliper Steel
High Tensile strenght
Heat resistance
Good moisture absorption
Excellent air pemeability
stability dimension
Suitable for linear speed 200-260m/min
Low noise and high speed of operation
Long life time
Specifications:
Model:WSD/GS-9
Material:PET100%
Applt speed:260m/min.
Thickness:(9±0.3)mm
Wideth:(1200-2900)mm
Tension:60Mpa
Heat-resistance:under200℃,accept short time pressure
under150℃,accept long time pressure
Weight per unit:(7±0.3)kg/m2
Min. winding radius:R70mm
Air-permeability:1.95M3/M2
Life:14000h
Port::Xingang
Date of delivery:15-30days
Tel: 86-311-80772027
E-mail: troy.l(at)huataogroup.com
Website:www.htwirebelt.com
Add: No.298,North Zhonghua Street, Shijiazhuang,Hebei,China
Huatao Wire Belt Factory
China [CN] 
Click enlarge Image