China supply Desander

Desander is the second phase of drilling fluids process. They are also centrifugal device but removing sand or bigger particles from drilling fluid to prevent abrasion of the pumps. They are used to separate sand from drilling fluids which is mixed with drilling muds and big articles. During drilling process mud is being poured from inlet and is getting deeper. when the vortex in the hydroclone running, the water spray from a pipe and the mud ,soil,big articles subside down the outlet. That is the recycling of mud in order to separate water from mud and get a clean water that will be used in next excavations.

TRZQJ Desander Technical Parameters 

Design Principles: TR desander is produced by an advanced design, careful engineering, quality materials and finest workmanship which comprising 8, 10, and 12 inches cone diameter. As desanders have varying capacity based on its diameter. Operation Mechanism: Desander include two 12-inch(305-mm) diameter polyurethane hydroclones slant mounted over the shaker. Each desander clone includes four replaceable wear resistant polyurethane sections that are joined together with quick release stainless steel clamps. The desander is furnished with an 8-inch(203-mm) diameter feed manifold and a 10-inch (254-mm) diameter discharge manifold and a 0-60 psi (4.1-bar) pressure gauge. The desander also includes a solids discharge trough to distribute the hydroclone underflow evenly onto the screening surface.TR is a professional manufacturer of solid control equipment in china. We will provide our clients high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. You are welcomed to consult or visit us any time.