400KW/500KVA Perkins Generator Set Supplier
China [CN] Diesel Generator Set Data
Set Type: XG-400GF
Standby Output: 400KW/500KVA
Prime Output: 364KW/454KVA
Rated Current: 655(A)
Rated Frequency: 50(Hz)
Start-up time: 5～6(s)
Power Factor: 0.8(Lag)
Rated Voltage: 400/230(V)
Standard Features
1. Engine: PERKINS 2506C-E15TAG1
2. Radiator 50℃ max
3. Fans are driven by belt, with safety guard
4. 24V charge alternator
5. Dry type air filter, fuel filter, oil filter
6. Alternator: single bearing alternator
7. IP23, insulation class H/H
8. Main line circuit breaker
9. Standard control panel
10. Absorber
11. Muffler
12. User manual
| Diesel Engine Data | ||
| Manufacturer: | PERKINS | |
| Model: | 2506C-E15TAG1 | |
| Standby/Prime Power: | 436KW/396KW | |
| Rated Speed: | 1500（r/min） | |
| Cycle: | 4 stroke | |
| Cylinder Arrangement: | 6 in line | |
| Displacement: | 15L | |
| Bore and Stroke: | 137*171（mm） | |
| Compression Ratio: | 16:1 | |
| Governor Type: | Electronic | |
| Start battery voltage: | 24V DC | |
| Air Intake System | ||
| Air Intake System: | Turbo | |
| Max Intake Restriction: | ||
| Burning Capacity: | 33m³/min | |
| Air Flow: | 722 m³/min | |
| Exhaust System | ||
| Exhaust Gas Flow: | 88m³/min | |
| Exhaust Temperature: | 535℃ | |
| Max Back Pressure: | 10.2kpa | |
| Fuel System | ||
| Fuel System: | Direct injection | |
| 100%( Prime Power) Load: | 216g/kwh | |
| 50%( Prime Power) Load: | 231g/kwh | |
| Oil System | ||
| Total Oil Capacity: | 62L | |
| Oil Consumption: | ||
| Engine Oil Tank Capacity: | ||
| Oil Pressure at Rated RPM: | ||
| Cooling System | ||
| Cooling Way: | Water-cooled | |
| Total Coolant Capacity: | 60L | |
| Thermostat: | 88-98℃ | |
| Max Water Temperature: | 107℃ | |
| Alternator Data | ||
| Manufacturer: | STARLIGHTSTAMFORD/SIEMENS/MARATHON/ENGGA/KEPU | |
| Excitation Mode: | Brushless and self- exciting | |
| Number of phase and Access Act: | 3-phase 4-wire | |
| Connecting Type: | "Y" type connecting | |
| Alternator Capacity: | 500KVA | |
| Alternator Efficiencies: | 95％ | |
| Overload: | （PRP）110% load can run 1h | |
| Protection Level: | IP22-IP23 | |
| Insulation Class, Temperature Rise: | H/H | |
| Telephone Influence Factor (TIF): | ＜50 | |
| THF: | ＜2% | |
| Voltage Regulation, Steady State: | ≤±1% | |
| Air Cooling Flow: | 0.216m3/s | |
| Altitude: | ≤1000m | |
Click enlarge Image