OEM Perkins Diesel Power Generator Supplier and Manufacturer 1650KW 50Hz
China [CN] Diesel Generator Set Data
Set Type: XG-1650GF
Prime Power: 1650KW/2062.5KVA
Rated Current: 2700(A)
Rated Frequency: 50(Hz)
Start-up time: 5～6(s)
Power Factor: 0.8(Lag)
Rated Voltage: 400/230(V)
Standard Features
1. Engine: PERKINS 4016TAG2A
2. Radiator 50℃ max
3. Fans are driven by belt, with safety guard
4. 24V charge alternator
5. Dry type air filter, fuel filter, oil filter
6. Alternator: single bearing alternator
7. IP23, insulation class H/H
8. Main line circuit breaker
9. Standard control panel
10. Absorber
11. Muffler
12. User manual
| Diesel Engine Data | ||
| Manufacturer: | PERKINS | |
| Model: | 4016TAG2A | |
| Standby/prime Power: | 1942.6KW/1766KW | |
| Rated Speed: | 1500（r/min） | |
| Cycle: | 4 stroke | |
| Cylinder Arrangement: | 16in line | |
| Displacement: | 61.12L | |
| Bore and Stroke: | 160*190（mm） | |
| Compression Ratio: | 13.6:1 | |
| Governor Type: | Electronic | |
| Start battery voltage: | 24V DC | |
| Air Intake System | ||
| Air Intake System: | Turbo | |
| Max Intake Restriction: | ||
| Burning Capacity: | 117 m³/min | |
| Air Flow: | ||
| Exhaust System | ||
| Exhaust Gas Flow: | 275m³/min | |
| Exhaust Temperature: | 450℃ | |
| Max Back Pressure: | 10.2kpa | |
| Fuel System | ||
| Fuel System: | Direct injection | |
| 100%( Prime Power) Load: | 207g/kwh | |
| 50%( Prime Power) Load: | 222g/kwh | |
| Oil System | ||
| Total Oil Capacity: | 237L | |
| Oil Consumption: | ||
| Engine Oil Tank Capacity: | ||
| Oil Pressure at Rated RPM: | ||
| Cooling System | ||
| Cooling Way: | Water-cooled | |
| Total Coolant Capacity: | 214L | |
| Thermostat: | 71-85℃ | |
| Max Water Temperature: | 101℃ | |
| Alternator Data | ||
| Manufacturer: | STARLIGHTKEPU/STAMFORD/SIEMENS/MARATHON/ENGGA | |
| Excitation Mode: | Brushless and self- exciting | |
| Number of phase and Access Act: | 3-phase 4-wire | |
| Connecting Type: | "Y" type connecting | |
| Alternator Capacity: | 1875KVA | |
| Alternator Efficiencies: | 95％ | |
| Overload: | （PRP）110% load can run 1h | |
| Protection Level: | IP22-IP23 | |
| Insulation Class, Temperature Rise: | H/H | |
| Telephone Influence Factor (TIF): | ＜50 | |
| THF: | ＜2% | |
| Voltage Regulation, Steady State: | ≤±1% | |
| Air Cooling Flow: | 0.216m3/s | |
| Altitude: | ≤1000m | |
Click enlarge Image