There are more and more diced products on the market, many varieties, but in operation and
installation, many customers will ignore some details, which are often the key to accidents or
damage to the machine. Let me explain to you today the steps to check before using
105 * 1.2 * 16 cutting disc:1) Check the outer casing of the machine, the outer casing must not be damaged; check the cutting
piece, and the cutting piece used should be intact. Inspection method: Observe the cutting piece
without gaps or cracks.2) Check that the protective cover of the cutting piece should be in good condition; check the cable
and the plug must not be damaged; run the power for 1 minute to check whether the rotating parts of
the tool are flexible and unobstructed.3) Before turning on the power, check if the power supply voltage meets the requirements and the
switch is in the OFF position.Although the inspection steps of the cutting piece seem to be very simple, you must check it
carefully, not only can reduce a lot of unnecessary trouble, but more importantly, it can extend the
life of the machine. I hope the above points can help you better use the cutting piece.
0 likes
China [CN] 
Click enlarge Image