Ettes Power
CNPC series natural gas engine generator & CCHPs, range from 300kW to 2MW,
high quality & performance in gas power generation plant in fields under
harsh working conditions. EJN Natural
Gas Congeneration Series Natural Gas Series Include 300kW, 500kW, 600kW, 700kW,
1000kW(1MW), 2000kW(2MW)Ettes CNPC series
gas fired generators & CHPs are driven by engines series of 6140, 12V190,
G12V190 and H16V190 etc, with merits of big displacement, sufficient
reserve-power, strong capability against loads-surge, easy for installation
& maintenance, long overhaul, widely used in oil & gas fields, coalmines
and wild construction etc. It is the ideal solution for electrical generation
to drive loads under harsh conditions for island operation.
Besides
standard package of electrical generator, Ettes can satisfy client’s special
requirements and make tailored design like CHP, CCHP/Trigeneration,
Cogeneration, ATS, Parallel operation system, Remote monitor & Control,
Modularized soundproof & weatherproof container, which can realize the most
efficient and comprehensive use of energy and generate electricity, hot water,
cooled water, hot steam or hot oil etc.
Customer Benefits for CNPC Gas Power
Generation
• The engine performance is
“Leading China” and “First class Global”
• Long history: produced by
engines plant under control by CNPC (China National Petroleum & Oil
Corporation), it is the first and the largest engine manufacture in China since
1953.
• Proven Technology: widely used
in 80% of China Oil & Gas Fields and Coalmines under harsh working
conditions.
• Fuel flexibility: a wide range
of methane based gases including natural gas and biogas etc.
• Designed for intensive use
(continuous duty), able to act as main power supply or standby power supply.
• Capable of working with
variable loads, strong capability of against loads-surge.
• Advanced technology of
close-loop control, lean-burn and Mixing before turbo.
• Adopting highly intelligent gas
control system of USA Woodward EGS, Germany Heinzmann or Motortech, the air
fuel ratio can be automatically adjusted as per fluctuation of gas components.
• Adopting intelligent &
digital ignition system from Germany Motortech or USA Altronic.
• Adopting super-turbocharged
technology from ABB.
• Heat Recovery system to realize
CHP, Cogeneration and Distribution Energy.
• Integrated & modularized
unit to facilitate easy transport and quick setup.
• Easy Maintenance in low
operations cost due to enchanced materials adopted.
• Ensured annually continuous
working over 8000 hours and long engine-life-span of over 45000 hours.
• Service and Spare parts are
widely and easily available, supplied by service center ETTES POWER.
Remarks:
• Above Gensets are based on 50Hz, 1000rpm, 400V, 3 Phases & 4 Wires.
• According to ISO3046-1 at U=0.4kV, cosphi=1.0 for 50Hz, methane number of natural gas>80, lower calorific value: LHV>36MJ/Nm³.
• Electrical efficiency is based on cosphi =1.0 and ISO3046 conditions. Heat is recovered from jacket water and exhaust gas cooled to 120℃.
• Operations conditions is based on ambient temperature -25-25℃ and altitude less than 1000m.
• For power deratings caused by other temps and altitudes, please consult Ettes Power.
• Other low voltages and high voltage of 3.3kV, 6.3kV and 10.5kV are available for options.
• Models with "N" for Natural gas (CNG, PNG, LNG, Shale Gas, Oilfield Associated Gas and Coalmine Gas etc).
• Special configurations for Soundproof Canopy & Container, ATS and Synchronizing Parallel System are available for options.
• Special configuration of CHP, CCHP (trigeneration), Cogeneration are available for options.
• All data provided on this site is for information purposes only, explicitly non-binding and subject to changes without further notice.